How to Use a Koala Baby Changing Station

The Koala Kare brand is the world’s most recognized name in baby changing stations. For over 25 years, Koala has striven to provide the best and most innovative childcare products. 

Parents around the world are all too familiar with the potential challenges they may face taking their baby out in public. Most babies don’t take into consideration where and when they answer the call of nature. We put them in diapers and hope for the best. Sometimes, however, parents might not be in the most opportune places when disaster strikes. What a relief it is to find a changing station when you’re out getting groceries, going out for dinner, attending a sporting event, or other types of public gatherings.

If it’s your first time being a parent, just remember K.O.A.L.A. when preparing to use the baby changing station.

Know the Features

It’s important to know the features of the changing station. Koala baby changing stations are supported by a heavy-duty steel chassis to support the weight of up to 200 pounds. Most models come with an internal gas shock to help with easy opening and closing of the tray. On the rounded corners of the tray are cut out notches you can use to hang bangs for easy access to your changing accessories. On the wall panel, there are also slots for disposable bed liners. Each changing station is also coated with Microban antimicrobial protection to help keep surfaces sanitized in between uses. 

Organize your Accessories

In preparation for using the changing station, be sure to mentally go through a list of materials you will need to change your baby’s diaper. You’ll more than likely need a fresh diaper, wipes, diaper cream or powder, and possibly a new change of clothes. Be sure to have all those items ready and within reach either in available open spaces on the table or by using the hanging slots for your diaper bag. You’ll want to make sure all your items are prepped and ready to go once you get your baby on the table.

Always Check Safety

Before placing your baby on the table, be sure to check there are no visible signs of damage to the table. Lower the table and put some pressure to ensure that it is firmly secured in its position. Perform a quick visual scan to make sure the surface area is cleaned from prior uses. Also, make sure to use the adjustable safety strap is usable and at the correct length for when you have your baby on the table. 

Lower your Baby onto Table

Once you have all the items you’ll need to change a diaper and you’ve checked to make sure everything is in proper working order, it’s time to carefully place your baby down onto the table. Depending on the positioning of the changing station and your personal preference, you can lie your baby down facing whichever direction you’d prefer. Be sure to strap baby down with enough space to allow for some movement, but still in a secured position. 

Assess and Address the Situation

The final (and sometimes the most dangerous) step is to assess and address the situation. Hopefully, it’s just a wet diaper. But as a KOALA prepared parent, you should be ready to tackle any messy situation your baby may throw your way. 


Who Invented the Hand Dryer?

You may be surprised by the impact that the simple hand dryer has had on daily life over the last 70+ years. Today’s current examples of advanced hand dryers began with an idea that George Clemens brainstormed back in 1948. According to Clean Link, this talented inventor from Chicago, Illinois developed one of the first electric dryers of this type. Over the years, this important invention would undergo functionality and design changes to make into the modern product found in many public restrooms around the country.

Market Watch refers to the industry that these products are sold in as the Hand Dryers Market. Although they are popular around the world for their utility and importance to personal hygiene, there are still a large number of public restrooms that do not have dryers in them. Clemens’s work on this one invention served to birth the industry and one of the most popular companies, World Dryer that manufactured them for decades.

The Importance of Progress

Not improving the design and its capabilities eventually caught up with the company, so says Atlas Obscura. The slow move to innovate the hand dryer worked to open the door to others in the industry. World Dryer for a time had the larger markets locked into their product offerings, but new inventors around the world would continue to reimagine the product. One of Clemens’s and other developers’ objectives was to reduce the use of towels and paper products in public restrooms.

Diverse Business Impacts

Most people are so accustomed to seeing hand dryer products in daily life, they don’t actually think about them. These are essential components of any public restroom design because of the hygiene goals of users.

Chain stores will purchase these for not simply one location but all of them. This makes reliability of critical importance in large scale purchasing decisions. The popularity and need for these dryers has propelled Clemens’ invention into the history books and established its own market.

Necessary Product Changes

The loudness of the original designs was something that needed to be considered for more modern versions. Although the product design and production began here in America with George Clemens’ bright vision, it would go on to change and evolve through the work of inventors around the world. Improved models like the Bobrick hand dryer have contributed to an ever-expanding market of staple products in an array of buildings, public spaces, and areas of commerce. This need will likely be responded to by many other advanced designs in the future.

Foundation for Advancements

Before Clemens gained popularity for his invention, there were others like Watrous and Basset that preceded him in this field. Clemens successfully took the hand dryer project to the next level, just as companies like Dyson are doing now. His original goal included being able to thoroughly evaporate water particles on the hands.

This work set the foundation for greater advancements in the product and the industry. Touchless dryers, for example, fit into a category of their own that has set the bar for other designs. There are certain design features for public restrooms that will be used no matter what the location happens to be. Some are designed with affordability and features in mind, while others serve to make a luxurious impression on users.

These dryers are essential for these public locations and essential for many operations. Food service and medical care are two fields that require these products and their use by staff. Clemens’ invention has steered production and made hygiene goals a critical objective for every industry.


Are hand dryers cleaner than paper towels?

Are hand dryers better than paper towels? While this might seem like a no brainer for most of us, answering this question can become quite hard once you dig a little deeper into the scientific side of it and consider what exactly clean means in terms of personal hygiene versus environmental impact. There are a lot of factors to be considered before deciding which one is the best one for you. Here are some of the basic comparisons to help inform your personal selection.

Paper Towels definitely steal the hygiene crown.

Taking in continuous study done by several scientists on this topic, paper towels are certainly way more hygienic. In most cases around the world, almost more than 75 percent of people prefer to choose paper towels over hand dryers.

Paper towels are also known to remove bacteria on hands much more effectively. Even though hand or jet dryers are capable of drying hands much faster than paper towels, paper towels are considered a better option to clean your hands.

Quick comparison:

  • Paper towels are preferred for eliminating bacteria on the hands
  • Hand or Jet dryers get the drying done way faster than paper towels

Air dryers help you reduce cost and overall energy use.

There is no doubt that paper towels are extremely expensive. People can make use of an unnecessary amount of paper towels for the mere task of drying their hands which increases the number of towels used every day. For a small company where minimizing costs is almost as important as good hygiene, paper towels might not sound like the best option.

By comparison, if you have installed a Bobrick hand dryer, it can be used any number of times. If you are part of a business where reducing energy use is a big priority, then you are better off using hand dryers over paper towels. But then again, it depends on the amount of electricity the dryer uses. That might affect the end carbon footprint calculations. If you have access to paper towels made of recycled materials they may end up being the cleaner option in terms of being green.

Quick Comparison:

  • Considering less cost as the main reason, hand dryers are a better option.
  • Considering the carbon footprint, paper towels and dryers are almost on the same page

So overall, which one is the cleanest?

In the case of eco-friendliness, this again depends on the type of energy source they utilize. Hand dryers which make use of renewable energy sources like the sunlight definitely are good for the atmosphere. The newly designed jet dryers which make use of cool air to dry hands are way better than traditional warm air dryers just because the new ones cause fewer emissions in the environment.

Paper towels can contribute to environmental pollutants both in their manufacturing and waste removal processes. But, if paper towels are made from recycled paper, then they are a good way to reduce tree cutting and thus helping the environment a lot more. In terms of hand hygiene, paper towels win the day. They’re more effective at wiping away bacteria and quicker to use, which makes people more likely to use them than a hand drier.

Quick Comparison:

  • Cool air jet dryers are the best for reducing environment impact.
  • Recycled paper towels are the best for hand hygiene and eco-friendliness.

We hope this article helps you understand some of the pros and cons to help you select the best way to dry your hands!

1 – ​
2 – ​


Why Don’t Paper Towel Dispensers Give Enough Paper?

Everybody who uses the bathroom needs to wash their hands. This is the day and age where people don’t want to spread germs, and since hand dryers are known for being less sanitary what better way than to dry your hands off with paper towels? But whenever you go use the restroom, particularly in a public place, you find that whenever you need to dry your hands after washing there is just not enough paper that comes out of the paper towel dispenser. No matter how frantically you wave your hands in front of the motion sensor, it dispenses towels at a seemingly glacial pace. Why is this?

There could be any number of reasons why automatic paper towel dispensers do not give enough paper. Some of the reasons may be logical and some may be a little illogical, but this is little comfort when you are in a rush to dry your hands and get back to your life. I know that when I dry my hands off after washing at a restaurant, I just wave my hand in front of the automatic dispenser of the paper towels and a small fraction of what I need appears. What happens next is that I have to continually wave my hand in front of the motion sensor and try to get more paper towel to come out. Now this happens to be an inconvenient thing when you’re trying to get back into the restaurant with your family and finish your meal but it seems and this is a part of daily life.

It appears that the electronic motor inside the dispenser does not want to give more than a smidge of a paper towel at a time. This is an inconvenience for all of us that need extra paper towels to dry your hands. Is the electric motor to blame? It very well may be, therefore, we have to blame the manufacturer of the motor. But is there an underlying issue with that?

In the environmentalist view, there is way too much paper usage out there. According to the environmentalists this is just a bunch of waste. It is estimated by waste managers that paper towels account for almost 40% of waste by volume from either an office building or dormitory. This is an understandable number since those in office buildings and dormitories don’t have a lot of time to wash towels every day that they use to dry their hands. It is way more convenient just to dry your hands using paper towels.

It is also the environmentalist position that the more paper towels you use equals more trees that need to be cut down to make more paper towels. This could be a reasonable argument, since you need trees to make paper towels. And, the more paper towels you use does equal the amount of trees that you need to make more. So, where does the blame really lie?

It seems that the blame should be shared equally between the manufacturers of the paper towels and environmental groups . The environmentalists raise a lot of concerns about how many paper towels are being used from dispensers, therefore depleting the number of trees. Therefore, products like Bobrick paper towel dispensers are designed to cut the difference between customer convenience and resource conservation.

Still waiting for that next paper towel? I guess we will all have to just wave our hands a little bit longer in the bathroom in front of the dispenser.


How Do Automatic Paper Towel Dispensers Work?

The automatic paper towel dispenser is a modern invention that offers an advanced method of dispensing paper towels. A predetermined length of paper towel is dispensed when you place your hands near the sensor. Thus, individuals can avoid touching the dispenser to avoid contact with bacteria or viruses that might be present. The dispensing of paper towel stops when a hand is removed and when there is ambient lighting available. Devices like Bobrick paper towel dispensers are designed to provide reliable operation that is intuitive for users and discourages waste.

Automatic paper towel dispensers are powered by electricity from a plug-in wall outlet. Paper towels are dispensed using a touchless switch and motor. The electronic source is made up of an array of photovoltaic cells. The cells energize a control circuitry that controls how the dispenser works by acting in response to a sensor that detects movement and dispenses paper towels.

The automatic (hands-free) operation of the dispenser is powered by a control circuitry. This includes the whole process of detecting movement, typically a hand, near the sensor and running the motor that dispenses paper towel. It also detects when a paper towel has been dispensed, turns off the motor, and charges the battery.

A circuit board is mounted between the wall of the cabinet and a mechanical plate. The photosensor sits on a mounting tube and is connected to the circuit board using leads or wires. The sensor on the paper towel dispenser responds to the changes in the intensity of light. The light passes through an opening on cover of the dispenser. The opening is fitted with a clear plastic lens to prevent debris from blocking it and preventing light from reaching the sensor. 

The automatic dispenser is made up of a cabinet and four walls, the top side, and base wall. It is mounted to a wall and the front cover is pivotally attached to the cabinet, for quick opening and closing when paper towels are being refilled. It may be mounted using different means such as adhesives or screws. The dispenser comprises of different dispensing means such as drive roller and pinch roller that enables the dispensing of paper towel. Once the paper towel dispensed through a slot at the base, the user can pull it and it is torn using the serrated edge.

The side walls comprise of a roll support cup and a roll support arm located opposite each other, forming the main roll station. The paper towel is then filled in the cabinet to the support cup then to the support arm respectively. Afterwards, a length of paper towel is threaded behind the transfer bar. The transfer bar is made up of a folk, cam, and overdrive roller. This enables the paper towel to be pulled in a downward motion, between the pinch roller and drive roller that is rotated by a motor. The length of paper towel being dispensed can be set to any desired length, mostly between 10-12 inches of paper towel with each cycle.

When the main roll is relatively depleted to about a 4-inch diameter, it is shown by the low paper indicator. An attendant then opens the dispenser cover and the main roll is then moved to the stub roll station. When the main roll of paper towel is moved to the stub roll, it allows new main roll paper towels to be filled on the roll support cup and roll support arm. Once the stub roll is finished, then the main roll begins putting paper towel between the pinch roller and drive roller to the outside of the dispenser.



Baby Changing Station FAQs

Having a baby comes with a lot of joy, but it also comes with a lot of responsibility. One of the biggest responsibilities is making sure your little one is clean, and always wearing a fresh diaper. To that end, many states have made it mandatory for a baby changing station to be installed in all restrooms open to the public. The changing station is pretty easy to use, being basically a shelf to do all necessary work on, but what about the important information that isn’t readily available to you? Keep reading for a more in depth look at how to use baby changing stations.

How Much Weight Can Baby Changing Stations Hold?

The weight threshold does vary manufacturer to manufacturer, but generally well-known products like the Koala baby changing station can hold up to a whopping 200 pounds. Now that’s a big baby! This extra margin of safety should offer a stable platform for your baby and diaper bag. It should also help prevent the station from being damaged if it is improperly handled. However, keep in mind that this weight limit has been tested on baby changing stations that have been properly applied to a permanent wall. The wall also must be able to accommodate the full weight that has been tested, as well as the hardware used to attach the changing station to the wall. If a changing station seems unstable, damaged or improperly installed in any way you should avoid using it and notify the building’s manager as quickly as possible.

Till What Age Can a Baby Safely Be on a Changing Station?

Even though the weight limit leaves lots of margin, it is recommended that you stop using changing stations, even stand alone ones in your home, when the baby has either reached 2 years of age or 30 pounds. At that age, the child becomes more difficult to wrangle and likes to grab things around them, like the supplies you need to help with the changing. You wouldn’t want them climbing their way off of a raised platform.

What Should Dads Do When There is No Changing Station in the Men’s Room?

Having changing tables for your baby that are available in the women’s room but not men’s rooms creates an awkward situation for moms and dads alike. Thankfully, most facilities you come across will have changing stations in both rooms. But sometimes corners are cut in the building process or facilities are outdated. So in the event that you come across one that doesn’t, what can you do?

To be ready for the situation, have a backup plan for changing your baby in the car or van. This means you’ll have to keep the right materials in your diaper bag or trunk, like a blanket to lay your baby on. Afterwards, you should let the building’s management know that their lack of a changing station in the men’s room caused a difficult situation for you as a dad and that they should consider installing one to improve their customer experience.

Are Changing Stations Required by Law?

Public or federal buildings are required to have baby changing stations in the restrooms. However, in all businesses that are not federal, while the ADA (Americans with Disabilities Act) recommend that these stations be available, it is up to the state to pass any legislation. The ADA has recommendations for how it ought to be mounted and even how high it should be from the floor. However, even when legislation is passed, many businesses may remain unaware or unresponsive to it. 

With a little practice, you can change your baby’s diaper with ease. We hope this list was able to give you some help!


Who Should Have Bathroom Grab Bars?

You would think the bathroom in the house would be the safest place on earth, but it’s not, it could be a very dangerous place for vulnerable people. 

Bathrooms are tricky places for a lot of people, and not just for the elderly. Bathroom grab bars help people get around the bathroom without needing to fear all the wet, slippery surfaces. Statistics show that three million people have injuries resulting from bathroom falls each year. Regrettably, most of these accidents could have been prevented simply by having safety features like Bobrick grab bars installed. So who should have grab bars installed in their bathrooms? The following is a list of the types of people who need to have a shower or bath bar installed in their bathroom. Keep in mind that although this is a list of people who usually need these bars installed in the bathroom, it is also generalized as there can also be other types of people needing this type of bathroom accessory.

Older People 

Statistics from the CDC show that seniors are at high risk of falling. Millions of elderly people fall and are treated for serious injuries. Holding bars make bathroom areas safer and prevent this from happening. 

People with Serious Health Conditions

Many people who have serious health conditions such as vision impairment, diabetes, obesity, heart conditions, etc have a deep fear of falling in the bathroom. So much so, that they refuse to take a shower or a bath. They become reluctant to bathe and this causes further health issues. Poor hygiene creates infections and can cause other health issues. The truth is that grab bars in your shower give people with health issues more confidence to bathe daily. 


According to the Center for Disease Control, more than 230,000 injuries are caused in the bathroom and injuries occur more frequently to women than men. Injuries can happen for many reasons including, pregnancy or low bone density. Injury rates tend to increase as women age. 

According to the CDC, injuries could be reduced by adding a few simple things to the bathroom, which include non-slip bathroom strips and bathroom grab bars outside the shower or tub. 


People who have physical disabilities also need a grab bar. Even though the physical impairment may be minor or be related to a child Any person, young or old who has any type of impairment needs to take special care when moving around in the bathroom. For this reason, bars should be equipped in bathrooms where any person who is physically impaired lives. 

How Should Shower Bars be Installed?

Most experts will say that two bars are needed. These should go on the back wall about 8 inches above the bathtub rim and about 24 inches from each other. In the shower, bars need to go on the sidewall, back wall or near a shower seat. 

They Come in Many Styles

Bathroom bars are available in many different lengths which range from 9 to 42 inches. These bars can even blend in with the decor and look like other bathroom fixtures. 


How to Install Bathroom Grab Bars

Protection from falls is vital in the home especially if there are older adults, or someone with a disability. A slip and fall can happen at anytime, and most of them occur in the bathroom. Providing even minimal protection can be simple and easy by adding grab bars to the bathroom. These cylindrical pieces of metal or plastic can also help save lives from injuries that have been sustained from a fall. Protective devices like Bobrick grab bars can be installed by professional installers, or they can be a do it yourself project for the handy person. To install the safety bars, the person doing the project needs to make sure that they have all of the necessary tools for the job.

Today, grab bars are no longer always required to be mounted between two wall studs. Newer mounting system allow the bars to be mounted anywhere without the need for a wall stud support. They can even be mounted on tile. For the proper installation of this safety feature, start by assembling all of the tools needed. Include some masking tape, a pencil, caulking, tile and glass bits, and assorted sized screws along with the electric drill and bar. Take the bar out of the box for inventory making sure that all pieces are included, and everything is in excellent condition.

The next step is to determine where the bar will be located. This will vary depending on who will be using it. If using the stud in the wall method is chosen, find two studs where the bar will fit between in the preferred location. If the bar is going in the shower, it should be about waist high of the person who will be using it. Studs are usually about 16 inches apart. Use the pencil to mark the location once the studs have been found. If there is difficulty, use a stud finder. For the 16 inch studs, a 24 inch bar should be a perfect fit. Most bars are placed at an angle between the studs.

Using a glass and tile bit, it is now time to pre-drill the pilot holes. The anchor will suggest the right sized hole to drill. Most bars use the 1/8 inch hole at the mark that is closest to the center of the stud. Once the hole has been made through the tile, and it is time to make the hole through the wood, change the bit to a wood or metal bit. It is now time to install the wall anchors. These are generally plastic wedges that can be hammered into the hole so that the screws will have something to grip. The screws are ready to slide the bar onto and into the wall and tightened up. It is vital to follow the instructions that come with the bar package to ensure that everything has been done properly.

These safety bars are designed to hold up to 250 pounds without worry. If the bar is going beside the toilet, the same instructions apply. Just lower to bar so that it accommodates the person it is intended for. There is no substitute for safety, and these bars provide security as well as safety and assurance. Protect the ones you love by installing safety features in the bathroom where the majority of slip and fall occur for the elderly and disabled.


How to Open A Toilet Paper Dispenser

If you have ever been in a public restroom then you have probably noticed that a some of the toilet paper dispensers are not like the typical dispenser that you would find in a home setting. They are typically a lot larger than the ones that you find in your home and they are able to hold anywhere between two and four rolls of toilet paper at one time so that there is plenty for people going in and out all day and does not require staff to come in and out all day every day just to refill the toilet paper. However, the problem with a commercial toilet paper dispenser is that it can be quite confusing and somewhat of a hassle to open so that you can put in a new roll. Below is a step by step guide to how you can open the dispenser and change out the rolls in no time.

Step 1: look on top of the dispenser for a key latch

Most dispensers have a keyhole on them. If it is a plastic dispenser, the key slot is more than likely found on the very top and if it is a metal dispenser than it is probably located either on the top or in the middle of the dispenser.
The plastic dispensers have a plastic key that you will press into the hole which releases the latch so it opens up. If it is a metal dispenser, there will be a more traditional key that you can use to open up the dispenser.

Step 2: open up the dispenser

In the average Bobrick toilet paper dispenser, once you get the key and press down, it will release a hatch that will allow the front of the dispenser to hinge down towards you. During this step, it is important to make sure that you hold onto the face of the dispenser as it comes to you or it can fall open too fast. Opening it too fast could also cause the toilet paper to fall right out.

Step 3: change out the toilet paper roll

Once you have opened up the dispenser, you can reach in and throw away the empty roll and replace it with one or two full rolls. Make sure that the start of the roll is facing down so that the person using it next is able to reach in there and grab it easily. Once the rolls are out in place, you will then grab the face of the dispenser that you previously let down, and push it back up. Make sure you push it up firmly until you hear a click. You will then hold it closed with one hand and use the other hand to insert the key again and lock it back. You will know that it is locked if you hear it click again.

Step 4: What to do if there is no place to insert the key

There may not always be a key or a place to put the key which can present a problem if you do not know how else to open it. If this is the case, what you will do is place your hand on the bottom of the toilet paper dispenser. Once you do this, you will search for a little latch that is underneath there, similar to those that you would find on the bottom of the dispenser. Once you locate the latch, gently pull it toward you and the face of the dispenser will come to you, and you will repeat every other step as normal.


How Much is a Commercial Soap Dispenser?

Soap! We all need it and use it. So many varieties to choose from. Hard soap, soft soap, scented and unscented. Glycerin based or goat’s milk. How about a moisturizing antibacterial? From soap dishes to soap dispensers, you have such a wide variety of options in front of you. In this article we will be covering a wide variety of various soap dispensers. Commercial soap dispensers that is. Yes you read right; the kind of dispensers that you see in public facilities. There are a wide variety of designs, sizes and price ranges. Continue reading to get the dish on the commercial soap dishes.

First off, who even buys commercial soap dispensers? Who’s even interested in them? Well, a lot of people. Just think about it. Anyone from a small business owner to a franchise owner to a large company to a small or a large corporation.

What Kind of Buildings Need Soap Dispensers?

Small Business Owners

Gas Stations


Hair Salons/Barbershops

Independent Resturants/Bars

Plus more…


Large Gastations

Convenience Stores

Grocery Stores

Large Chain Restaurants (McDonald’s, Wendy’s, etc.)

And some…

Large Companies



Office Buildings

Grocery Stores

And others…

Various Corporate/Government/State Facilities

Corporate Headquarters

Military Bases

Fire Departments

Police Stations

Public Parks

Etc etc…

So now that we covered the fact that commercial soap dispensers are for just about anyone and any kind of business we can move on the several various types.

Wall Mounted Soap Dispensers


20 oz Push-Up Soap Dispenser – Wall Mount

This one is mostly white plastic and looks like an upside down teardrop; and it has a little “push-up” button used to dispense the soap. These are the pretty much the most basic and the most in-expensive. Used primarily in restrooms.


Update SD-32 32 oz Push-Button Soap Dispenser – Wall Mount

This model has a larger capacity and is a sleek black color. It has a large push button and is excellent for any commercial use.


Winco SD-100 Soap Dispenser, 1 Liter Capacity – Wall Mount

Hold a decent amount of soap so refilling is less frequent. Has a grey color and a window to veiw soap level.


Krowne H-116 30 oz Soap Dispenser – Wall Mount

This model is bigger and square shaped. It is a translucent blue color and is ideal for restrooms and restaurant kitchens.


San Jamar S30TBK Classic Soap Dispenser – Wall Mount

This unit has a 30-oz capacity and dispenses 0.8 mL soap per portion. It is a translucent black color with a square shape.


San Jamar SF900TBK 900 mL – Wall Mount (Foam Soap Dispenser)

This model dispenses foam soap. Made of impact-resistant plastic it is highly durable. The color is pesrlescent black.


Alpine Industries 423-SSB 40 oz – Wall Mount

This model is stainless steel; which makes it rust proof. It also has a lock and key to prevent theft. It has a clear circular window for viewing soap level.


Bobrick B-2111 Classic Series – Wall Mount

This model is also stainless steel and it also has a lock and key. Has a 40-oz capacity and it top filled only.


Advance Tabco 7-PS-12 Soap Dispenser – Wall Mount

This model is super high end with a sleek and stylish finish. Perfect for a lounge or headquarters. It has a 600mL capacity and is of a translucent black color. 

Deck Mounted Dispensers


Krowne H-101 Soap Dispenser – Deck Mounted

This design has a 13-oz capacity and a stainless steel pump. Requires a 1 1/8in opening. Perfect for restaurant restrooms.


Rubbermaid FG401544 Liquid Soap Dispenser – Deck Mounted

This model is rounded, and polished chrome. It is perfect for restaurant and corporate bathrooms.


Bobrick B82216 Counter Mounted Soap Dispenser

This one has a 6 inch spout and is made of shatter-resistant polyurethane. For counters up to 1″ thick.

So as you can see there are a wide variety of models to choose from. From wall mounted to deck mounted; from chrome to stainless steel; from liquid soap to foam dispensers, the choices are many.