No products in the cart.
B-2888 – Multi-Roll Toilet Tissue Dispenser, Stainless Steel
Multi-Roll Toilet Tissue Dispenser, Stainless Steel
This dependable stainless steel classic is a multi-roll surface-mounted toilet tissue dispenser. Made with type-304 stainless steel, the clean weld adds to the polished appearance. This includes a proper dispensing mechanism and cam. The door of the dispenser can be secured within the cabinet, latching on to the two inner rivets. Once latched, the cabinet can be locked with a key to the tumbler. This unit holds two standard-core toilet tissue rolls up to 5-1/4″ (133mm) diameter (1800 sheets). The rolls stack on top of each other, the one above automatically drop in place when the bottom roll is depleted.
Specifications
The manner of the installation is dependent on the partition or material of the wall or panel it is being attached to.
In the case of partitions made with particle-board or a solid core, secure with four #10 x 5/8″ (4.8 x 16mm) sheet-metal screws (not furnished) at points indicated by an S, or provide through-bolts, nuts, and washers. When installing a hollow-core metal partition, provide solid backing into which sheet-metal screws can be secured. If two units are installed back-to-back, then provide threaded sleeves and machine screws for the full thickness of the partition. For plaster or drywall construction, provide concealed backing to comply with local building codes, then secure the unit with sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws or provide 3/16″ (5mm) toggle bolts or expansion bolts.